E & T Fasteners' one piece Strain Relief Bushings securely anchor, absorb, and protect cables and wires from push/pull and twist forces, while insulating them from irregular or sharp panel edges. Most of these tough Nylon bushings meet all Underwriters Laboratories' stringent pull-out and temperature specifications and meet Canadian Standards Association Requirements. They are easily and quickly installed with E & T Fasteners special installation pliers or other hand or production tools. Stock sizes are in black H.S. Nylon, and the temperature index is 105º Centigrade (U.L. rated 94v2). E & T Fasteners can tool other sizes upon request. Colors available upon request.
NOTE: , , and not UL Recognized
Must Be Purchased in Packaged QuantityMay also be available in Nylon, PVC, Polypropylene, Phenolic, PTFE, G10, Kel-F®, Delrin/Acetal, Neoprene, Mylar, Glass-Filled Nylon, Peek, CPVC, ABS, PVDF / Kynar, Isoplast, Polycarbonate, Polyethylene, or Ultem®
| Description | Cable Size | Cable Type | Cross Section | Dia. A | Flats B | Gauge | Length D | Max. Panel Thk. C | Strap Type | Width E | Quote |
| MP2L1 | .120 X .220 | SPT-1 | Flat | 0.375 | 0.33 | 18/2 | 0.41 | 0.125 | "Y" | 0.42 |  |
| MP2M4 | .156 X .187 | AWN | Round | 0.375 | 0.33 | 14 | 0.41 | 0.062 | "Y" | 0.391 | |
| MP2M5 | .125 X .156 | AWN | Round | 0.375 | 0.33 | 16 | 0.41 | 0.062 | "Y" | 0.391 | |
| MP2P4 | .120 X .220 | SPT-1 | Flat | 0.375 | 0.33 | 18/2 | 0.41 | 0.062 | "Y" | 0.42 | |
| MP3P4 | 0.120 X 0.220, 0.120 X 0.220 | SP-1, SPT-1 | Flat | 0.437 | 0.39 | 18/2, 18/2 | 0.41 | 0.062 | "Y" | 0.484 | |
| MP4J4 | .120 X .300 | SPT-1, SPT-2, HPN | Flat | 0.5 | 0.465 | 18/3, 18/2, 18/2 | 0.406 | 0.032 | "Y" | 0.578 | |
| MP4K1 | 0.150 X 0.400, 0.160 X 0.300, 0.160 X 0.300, 0.150 X 0.280, 0.150 X 0.280 | SPT-2, HPN, SPT-2, HPN, SPT-2 | Flat | 0.5 | 0.46 | 18/3, 16/2, 16/2, 18/2, 18/2 | 0.495 | 0.095 | "Y" | 0.565 | |
| MP4K1Z | 0.150 X 0.400, 0.160 X 0.300, 0.160 X 0.300, 0.150 X 0.280, 0.150 X 0.280 | SPT-2, HPN, SPT-2, HPN, SPT-2 | Flat | 0.5 | 0.46 | 18/3, 16/2, 16/2, 18/2, 18/2 | 0.495 | 0.095 | "Z" | 0.565 | |
| MP4K4 | .120 X .300 | SPT-2, HPN | Flat | 0.5 | 0.465 | 18/2, 18/2 | 0.406 | 0.1 | "Y" | 0.578 | |
| MP4L10 | 0.150 X 0.400, 0.160 X 0.300, 0.160 X 0.300, 0.150 X 0.280, 0.150 X 0.280 | SPT-1, HPN, SPT-2, HPN, SPT-2 | Flat | 0.5 | 0.46 | 18/3, 16/2, 16/2, 18/2, 18/2 | 0.495 | 0.187 | "Z" | 0.565 | |
| MP4L4 | .120 X .300 | SPT-1, SPT-2, HPN | Flat | 0.5 | 0.465 | 18/3, 18/2, 18/2 | 0.406 | 0.156 | "Y" | 0.578 | |
| MP4N4 | .120 X .300 | SPT-2, HPN | Flat | 0.5 | 0.465 | 18/2, 18/2 | 0.406 | 0.062 | "Y" | 0.578 | |
| MP5K4 | .150 X .400 | SPT-2 | Flat | 0.562 | 0.53 | 16/2 | 0.609 | 0.125 | "Y" | 0.625 | |
| MP5KN4 | 0.150 X 0.400, 0.160 X 0.300 | SPT-2, SPT-2 | Flat | 0.562 | 0.53 | 18/3, 16/2 | 0.609 | 0.062 | "Y" | 0.625 | |
| MP5N4 | 0.250, 0.250, 0.255, 0.255, 0.290 | SV, SVT, SV, SVT, HPD | Round | 0.5 | 0.45 | 18/2, 18/2, 18/3, 18/3, 16/2 | 0.438 | 0.062 | "Y" | 0.578 | |
| MP5P4 | 0.250, 0.250, 0.255, 0.255, 0.290 | SV, SVT, SV, SVT, HPD | Round | 0.5 | 0.45 | 18/2, 18/2, 18/3, 18/3, 16/2 | 0.438 | 0.1 | "Y" | 0.578 | |
| MP5W1 | 0.120 x 0.300, 0.160 X 0.300, 0.160 X 0.410, 0.160 X 0.370 | SPT-2, SPT-2, SPT-2, HPN | Flat | 0.562 | 0.53 | 18/3, 16/2, 16/3, 16/3 | 0.609 | 0.125 | "Y" | 0.625 | |
| MP6L10 | .325 X .360 | SJ, SJT, SJO | Round | 0.625 | 0.55 | 18/2, 18/3, 16/2, 16/3, 16/2, 16/3 | 0.666 | 0.125 | "Z" | 0.725 | |
| MP6N34 | 0.355, 0.405, 0.430 | SJ, SJT, SJT | Round | 0.625 | 0.55 | 16/3, 18/3, 16/3 | 0.58 | 0.062 | "Y" | 0.703 | |
| MP6N35 | 0.390, 0.390, 0.405, 0.405, 0.390 | SJO, SJ, SJT, SJO, SJT | Round | 0.625 | 0.55 | 18/2, 18/2, 16/2, 18/2, 18/2 | 0.58 | 0.062 | "Y" | 0.703 | |
| MP6N4 | 0.300, 0.300 | SJT, SJO | Round | 0.625 | 0.55 | 18/2, 18/2 | 0.58 | 0.062 | "Y" | 0.703 | |
| MP6N44 | .120 X .300 | SPT-1 | Flat | 0.625 | 0.57 | 18/3 | 0.6 | 0.062 | "Y" | 0.69 | |
| MP6N45 | .120 X .300 | SPT-1 | Flat | 0.625 | 0.545 | 18/3 | 0.6 | 0.062 | "Y" | 0.69 | |
| MP6P34 | .325 X .360 | SJ, SJT, SJT, SJO | Round | 0.625 | 0.55 | 18/3, 16/3, 18/3, 18/3 | 0.58 | 0.125 | "Y" | 0.703 | |
| MP6P35 | .325 X .360 | SJ, SJ, SJ, SJT, SJT, SJO, SJO, SJO | Round | 0.625 | 0.55 | 18/2, 18/3, 16/2, 16/2, 18/2, 18/2, 16/2, 18/3 | 0.58 | 0.125 | "Y" | 0.703 | |
| MP6P40 | 0.3 | SJ, SJT, SJO | Round | 0.625 | 0.55 | 18/2 | 0.58 | 0.125 | "Y" | 0.703 | |
| MP6W10 | 0.3 | SJ, SJT, SJO | Round | 0.5 | 0.465 | 18/2 | 0.437 | 0.09 | "Y" | 0.563 | |
| MP7K2 | .325 X .360 | SJ, SJ, SJ, SJ, SJT, SJT, SJO, SJO, SJO | Round | 0.875 | 0.77 | 18/4, 16/2, 16/3, 14/2, 18/3, 16/3, 14/2, 16/3, 18/4 | 0.75 | 0.125 | "Z" | 0.922 | |
| MP7K3 | .325 - .360 | SJ, SJ, SJT, SJO, SJO | Round | 0.875 | 0.77 | 18/3, 16/2, 16/2, 18/3, 16/2 | 0.75 | 0.125 | "Z" | 0.922 | |
| MP7P2 | 0.360, 0.370, 0.405, 0.430, 0.405, 0.430, 0.405, 0.390, 0.390, 0.405 | SJTO, SJT, S, S, STO, STO, S, S, STO, STO | Round | 0.75 | 0.66 | 18/4, 14/3, 18/3, 16/3, 18/3, 16/3, 16/2, 18/2, 18/2, 16/2 | 0.745 | 0.125 | "X" | 0.83 | |
| MP7P3 | .160 X .410 | SPT-2 | Flat | 0.736 | 0.657 | 16/3 | 0.59 | 0.125 | "Z" | 0.785 | |
| MP7W2 | 0.370 - 0.425, 0.370 - 0.425, 0.390 - 0.430, 0.390 - 0.430, 0.390 - 0.430, 0.390 - 0.430, 0.390 - 0.430 | SJT, SJT, S, S, STO, STO, STO | Round | 0.875 | 0.77 | 14/3, 12/3, 18/3, 16/3, 16/2, 16/3, 18/3 | 0.75 | 0.125 | "Z" | 0.922 | |
| MP8P2 | .530 - .600 | S, S, ST | Round | 0.875 | 0.84 | 14/2, 14/3, 12/2 | 0.812 | 0.125 | "Z" | 0.922 | |
| MP9P2 | 0.570, 0.640, 0.650, 0.700 | S | Round | 1.093, 1.125, 1.093, 1.187 | 1 | 12/3, 10/2, 10/3 | 0.99 | 0.281 | "Z" | 1.215 | |
| MP13L1 | .120 X .220 | SPT-1 | Flat | 0.437 | 0.39 | 18/2 | 0.5 | 0.062 | "Z" | 0.51 | |
| MP14L1 | 0.150 X 0.280, 0.150 X 0.280, 0.160 X 0.300 | SPT-2, SPT-2, HPN | Flat | 0.5 | 0.45 | 18/2, 16/2, 16/2 | 0.687 | 0.1 | "Z" | 0.563 | |
| MP15L1 | .250 X .265 | SV | Round | 0.5 | 0.45 | 18/2, 18/3 | 0.687 | 0.1 | "Z" | 0.562 | |
| MP16L1 | 0.150 X 0.400, 0.160 X 0.370, 0.190 X 0.350, 0.200 X 0.370 | SP-2, HPN, SPT-3, SPT-3 | Flat | 0.562 | 0.525 | 18/3, 16/3, 18/2, 16/2 | 0.875 | 0.125 | "Z" | 0.625 | |
| MP30-1 | 0.160 X 0.410, 0.120 X 0.300 | SPT-2, SPT-1 | Flat | 0.73 | 0.56 | 16/3, 16/3 | 0.67 | 0.125 | "Z" | 0.75 | |
| MP302 | 0.150 X 0.400, 0.160 X 0.410, 0.320 X 0.650 | SPT-2, SPT-2, SPT-3 | Flat | .625 X .375 | 0.625 | 18/3, 18/3, 16/3 | 0.46 | 0.1 | "Z" | 0.66 | |
| MP31-2 | 0.180 - 0.425 , 0.425 - 0.475 | SJT, SPT-3 | Flat, Round | 0.875 | 0.84 | 12/3, 12/3 | 0.812 | 0.125 | "Z" | 0.922 | |
| MP33-10 | 0.245 X 0.425, 0.240 X 0.420, 0.240 X 0.525 | SPT-3, SPT-3, HPN | Flat | .750 X .875 | 0.875 | 16/3, 14/2, 14/3 | 0.77 | 0.125 | "Z" | 0.895 | |
| MP34-2X | 0.240 X 0.420, 0.290 X 0.650 | SPT-3, SPT-3 | Flat | 0.875 | 0.84 | 14/3, 12/3 | 0.812 | 0.125 | "X" | 0.922 | |
