Cradle Mounts

Cradle Mounts

Cradle Mounts are used in applications where a low profile is necessary. Each mount offers a four way entry and is secured with either a screw or adhesive backing. is secured with a #2 - #4 or #6 screw, uses a #6 flat head screw. NOTE: the adhesive mounts have an acrylic foam backing that should be used on a smooth, clean, dry surface.
May also be available in Nylon, PVC, Polypropylene, Phenolic, PTFE, G10, Kel-F®, Delrin/Acetal, Neoprene, Mylar, Glass-Filled Nylon, Peek, CPVC, ABS, PVDF / Kynar, Isoplast, Polycarbonate, Polyethylene, or Ultem®

Cradle Mounts Variations

DescriptionQuote
1" Cradle Mount (Adhesive)
1
Request Quote
1" Cradle Mount (Screw)
1
Request Quote
3/4 Cradle Mount (Adhesive)
3/4
Request Quote
3/4 Cradle Mount (Screw)
3/4
Request Quote
3/4 Cradle Mount (Adhesive)
3/4
Request Quote
Add to Cart:

Eastern US Sales/ Operations

41 Odell School Road Unit A

Concord, NC 28027

Toll-free: (800) 650-4707

Fax: (704) 933-5775

eric@fastenercomponents.com

Western US Sales/ Operations

14360 Lakeshore Drive

Clearlake, CA 95422

Toll-free: (800) 732-0530

Fax: (707) 995-2994

hope@fastenercomponents.com

International Sales / Operations

Phone: 1 (704) 933-5774

hope@fastenercomponents.com
Copyright © 2020 E & T Fasteners.