Conduit Clips

Conduit Clips
Various wiring, such as telephone wire, is often routed with electrical conduit. "Conduit Clips" are designed to snap onto electrical conduit. The integrated wireholder on the clip allows wiring to be secured to the conduit. Installation is faster and easier than with a wire tie, which is often used for this purpose. The clip can be easily removed if necessary. Two sizes are available for 1/2" and 3/4" ID conduit, which will accomodate various wire sizes up to 5/16" diameter. Parts are molded in light weight, chemical and corrosion resistant Nylon 6/6.

Conduit Clips Dimensions
May also be available in Nylon, PVC, Polypropylene, Phenolic, PTFE, G10, Kel-F®, Delrin/Acetal, Neoprene, Mylar, Glass-Filled Nylon, Peek, CPVC, ABS, PVDF / Kynar, Isoplast, Polycarbonate, Polyethylene, or Ultem®

Conduit Clips Variations

DescriptionABCQuote
1/2"0.20.250.25Request Quote
3/4"0.3120.3120.25Request Quote
Add to Cart:

Eastern US Sales/ Operations

41 Odell School Road Unit A

Concord, NC 28027

Toll-free: (800) 650-4707

Fax: (704) 933-5775

eric@fastenercomponents.com

Western US Sales/ Operations

14360 Lakeshore Drive

Clearlake, CA 95422

Toll-free: (800) 732-0530

Fax: (707) 995-2994

hope@fastenercomponents.com

International Sales / Operations

Phone: 1 (704) 933-5774

hope@fastenercomponents.com
Copyright © 2020 E & T Fasteners.