Screws & Bolts
Glass Filled Isoplast Flange Nuts
Washers, Shoulder Washers, Screw Insulators, & Spacers
Clear Binding Post & Screws
Bumpers & Rubber Feet
Quick Binding Hardware
Circuit Board Hardware
Hose Clamps & Installation Tools
Panel Fasteners & Hole Plugs
Press-Loc Thumb Screw Knobs
Wire Handling Hardware & Accessories
Wiring Accessories & Cable Ties
X-Mas Tree Clips, Plugs, & Bushings
Make a Payment
THREADED RODS AND MATERIALS
Threaded Rods: Holding It All Together
Toughness, tensile strength and tailor-made specifications. That’s the E&T Fasteners difference – combining a wide variety of durable threaded rod materials to meet your specific needs. Whether its excellent superior strength, great resistance to wear or chemical corrosion; E&T Fasteners can bring it all together at an affordable price. From lightweight, non-toxic and non-sparking properties to weather resistant and rust proof materials, we deliver threaded rods that can be utilized in many applications from small, simple commercial anchor bolts to large, complex industrial rods requiring non-flammable, non-combustible properties. In addition, we provide wide spread Acme threads with a 29° thread angle that allows for a wider base and a stronger rod so it can carry a greater load than a similarly sized square thread. If thread direction is a concern, ask our experts if you should use a right, left or dual direction threaded rod to best fit your application.
Selecting the appropriate material that will be best suited for your application is vital. Threaded rods can be made of many material types with some providing great tensile strength, excellent high-temperature resistance, good conductivity, low temperature cold tolerance, excellent corrosion resistance, and low magnetic permeability. Most common materials used are Nylon, Polypropylene, and PVC. E&T Fasteners can provide a variety of different materials that can be purchased with standard specifications, or based on your custom requirements of strength, length, and material content
- G10/FR4, G7, G10-CR, G11
- Glass-filled Nylon
- Vinyl Ester
Standard threaded rods are available in plastic materials in the following sizes: 4-40, 6-32, 8-32, 10-24, 10-32, 1/4-20, 5/8-11, 5/16-18, 3/8-16, 1/2-13, 3/4-10, 7/8-9 and 1-8. Stock lengths are available in three and four foot lengths. Two, five, six and eight foot lengths are available upon request.
View Standard Threaded Rod Sizes / View Metric Threaded Rod Sizes
Custom Threaded Rods
Unique jobs require custom threaded rods. Need metric sized threaded rods? We can help. Specs call for uncommon materials such as Teflon/PTFE, Vinyl Ester, or Kynar? We’ve got that covered. Size requirements vary? We can provide precise custom rods with quick turnaround. Not sure what materials to use? Check with our experts. We provide steel rod replacements, large size threads, partial threaded and fully threaded rods. Need nuts for threaded rod? Email us with your questions, specifications, custom sizes, colors or conversion needs. Custom threaded rods are subject to minimum quantities and may incur additional tooling charges based on volume and dimensions.
Best Suited Applications
- Consumer Goods
- Industrial Machines
- Oil Refineries
- Marine / Boating
Quality Assured Adhesion
Before our threaded rods are sold, we test the tensile strength; wear resistance and effectiveness to ensure a proper, consistent fit every time. We have been testing and developing our threaded rods for years using only certified materials to protect against manufacturing defects and to provide you with a top quality product.