Snap Tacks

Snap Tacks

E & T Fasteners' two-piece snap tack consists of a male acetal tack and a female nylon button retainer. The tack has a sharp point for piercing soft materials that will not require a pre-punched hole. Easily assembled by pushing the tack through the front of the soft material and pushing the retainer to the second detent - no tools required. After assembly simply break off the pointed end and the remaining end is shielded by the retainer.

CAUTION the point is very sharp and can pierce your skin.

Can be used as an emergency button - no sewing expertise , thread, or needle required.


Snap Tacks Dimensions
May also be available in Nylon, PVC, Polypropylene, Phenolic, PTFE, G10, Kel-F®, Delrin/Acetal, Neoprene, Mylar, Glass-Filled Nylon, Peek, CPVC, ABS, PVDF / Kynar, Isoplast, Polycarbonate, Polyethylene, or Ultem®

Snap Tacks Variations

DescriptionQuote
3/8" Female ButtonRequest Quote
1/16" Male TackRequest Quote
1/8" Male TackRequest Quote
3/16" Button Male TackRequest Quote
3/16" Male TackRequest Quote
Add to Cart:

Eastern US Sales/ Operations

41 Odell School Road Unit A

Concord, NC 28027

Toll-free: (800) 650-4707

Fax: (704) 933-5775

eric@fastenercomponents.com

Western US Sales/ Operations

14360 Lakeshore Drive

Clearlake, CA 95422

Toll-free: (800) 732-0530

Fax: (707) 995-2994

hope@fastenercomponents.com

International Sales / Operations

Phone: 1 (704) 933-5774

hope@fastenercomponents.com
Copyright © 2020 E & T Fasteners.