Removable Rivets

Removable Rivets

Removable Rivets are two-piece nylon rivets which can be removed by retracting the pin, and then the body. The body incorporates a slot in line with the pin so that the pin can be removed by inserting a small screw driver, other sharp edge, or even a fingernail underneath the head of the pin. P/N in addition to working in a .250 round hole, will also fit the .210"/.218" square hole found in the "darling" type shelf commonly found in retail stores.


Removable Rivets Dimensions
May also be available in Nylon, PVC, Polypropylene, Phenolic, PTFE, G10, Kel-F®, Delrin/Acetal, Neoprene, Mylar, Glass-Filled Nylon, Peek, CPVC, ABS, PVDF / Kynar, Isoplast, Polycarbonate, Polyethylene, or Ultem®

Removable Rivets Variations

DescriptionABCHole SizePanel ThicknessQuote
Removable Rivet0.3750.070.50.1880.0625Request Quote
Removable Rivet0.3750.070.50.1880.125Request Quote
Removable Rivet0.43750.070.50.250.125Request Quote
Removable Rivet0.43750.070.50.250.1875Request Quote
Removable Rivet0.43750.070.480.250.0625Request Quote
Add to Cart:

Eastern US Sales/ Operations

41 Odell School Road Unit A

Concord, NC 28027

Toll-free: (800) 650-4707

Fax: (704) 933-5775

eric@fastenercomponents.com

Western US Sales/ Operations

14360 Lakeshore Drive

Clearlake, CA 95422

Toll-free: (800) 732-0530

Fax: (707) 995-2994

hope@fastenercomponents.com

International Sales / Operations

Phone: 1 (704) 933-5774

hope@fastenercomponents.com
Copyright © 2020 E & T Fasteners.