Nylon PC Board Card Guides

E & T Fasteners' Printed Circuit board Support Guides are an economical and fast solution to mount P.C. Boards. Card insertion is simple and fast. The smooth positive channel guides the P.C. Board and firmly supports and protects the board. Guides are molded of tough, electrically insulating nylon 6/6 and are designed to snap into pre-punched holes in the chassis. E & T Fasteners has available the seven most popular sizes. Other sizes will be tooled on request.

The Printed Circuit Board Card Guide is designed to fit a .125" + .003" - .001" front diameter hole and a .120" +/- .005" x .218" slot rear hole.

Nylon PC Board Card Guides Dimensions
May also be available in Nylon, PVC, Polypropylene, Phenolic, PTFE, G10, Kel-F®, Delrin/Acetal, Neoprene, Mylar, Glass-Filled Nylon, Peek, CPVC, ABS, PVDF / Kynar, Isoplast, Polycarbonate, Polyethylene, or Ultem®

Nylon PC Board Card Guides Variations

3" Card Guide w/ Split Legs32.5Request Quote
4" Card Guide w/ Split Legs43.5Request Quote
4 1/2" Card Guide w/ Split Legs4.54Request Quote
5" Card Guide w/ Split Legs54.5Request Quote
6" Card Guide w/ Split Legs65.5Request Quote
5 1/2" Card Guide w/ Split Legs5.55Request Quote
2 1/2" Guide2.52Request Quote
3" Guide32.5Request Quote
3 1/2" Guide3.53Request Quote
4" Guide43.5Request Quote
4 1/2" Guide4.54Request Quote
5" Guide54.5Request Quote
5 1/2" Guide5.55Request Quote
6" Guide65.5Request Quote
2 1/2" Guide w/ Split Legs2.52Request Quote
  • Model: Nylon PC Board Card Guides

Parse Time: 0.331 - Number of Queries: 181 - Query Time: 0.08212550383